BROOKFIELD INTRODUCTION

For 65 years Brookfield Engineering Laboratories has been the world's leading manufacturer of viscosity measuring equipment for laboratory and process control applications. The new generation of sophisticated Brookfield Viscometers and Rheometers are world standards for fast , accurate, reliable measurement and control.

THE BROOKFIELD DIAL READING VISCOMETER

The  Brookfield Dial Reading Viscometer is a rugged, mechanically simple measurement  instrument. Its calibration spring is unaffected by long use or extreme environmental conditions, retaining its calibration indefinitely. Readings from the Viscometer dial can be directly converted into centipoises units (cP); no timing or involved calculations are required.  Accurate reproducible viscosity determinations within + 1% of the range  in use can be usually made in less than 30 seconds.

THE BROOKFIELD LOW COST DIGITAL VISCOMETER MODEL  DV-E

The Brookfield DV-E has set a new world standard for value in viscosity measurement. Simplified controls allow operators to change test parameters quickly with the push of change test parameters quickly with the push of a switch & turn of a knob. The Digital display ensures easy and accurate readout of test results for simultaneous measurement of viscosity & torque. Quality of manufacturer guarantee reliable performance & long life DV-E Benefits

• Easy to use

• Direct Display in cP or mpa.s% Torque, spindle & speed  

• 18 speeds for greater Range capability (0.3 to 100 rpm)  

• Accuracy +  1%, reproducibility + 0.2%

THE BROOKFIELD  DIGITAL VISCOMETER MODEL  DV- I  +

The Brookfield Digital Viscometers combine traditional Brookfield Accuracy, reliability and versatility with the advantage of electronic sensing, indication & output.
It continuously senses and displays on easy-to-read LCD:

• Viscosity (cP or mPa.S)

• % scale (Brookfield)

• Speed (RPM)

• Spindle

• Timed stop feature

• Auto zero & Auto range

• Warns of under or over range conditions

• Direct Output to Chart Recorder Compatibile with all Brookfield  Accessories

THE BROOKFIELD  DIGITAL PROGRAMMABLE VISCOMETER MODEL  DV- II +

The most versatile viscometer Measures Temperature and Viscosity Simultaneously. Programmable operation create & download up to four Test Programmes via your PC. Broader Speed & Shear rate Range. 54 user selectable speeds 0.01 to 200 RPM. Enchanced Keypad Senses & displays continuously -  Viscosity (cP or mPa.s) -  Temperature (0C or 0F) -  Speed (RPM) -  Shear rate / shear stress -  % Torque (Brookfield) Auto zero and Auto range. Warns of under or over Range Condition.

THE BROOKFIELD  VISCOSITY STANDARDS

Brookfield viscosity standards provide a convenient, reliable means of checking the calibration of any viscometer / rheometer.
These stable non-toxic silicone fluids are accurate to + 1% of the stated viscosity & are calibrated by methods traceable to the National Institute  pf Standards and Technology (NIST). The selection of two or three fuilds calibrated at 25 deg C are available in the following 11 different viscosities.
5 cps; 10cps; 50 cps; 100 cps; 500 cps; 1,000 cps;
5,000 cps; 12,500 cps; 30,000 cps; 60,000 cps; 1,00,000 cps;

Special order fluids:

• Viscosity Blends calibrated at 25 deg C

• Temperature calibration

• High temperature fluids

• OIL Viscosity standards

Click here for Model Selection Table